| Quantity: | |
|---|---|
JC-090
Jiangsu Jiechuang
JC-090 Split Type Electromagnetic Flowmeter
This split electromagnetic flowmeter includes a pipeline sensor and an independent wall-mounted converter, connected by shielded signal cable.
It works based on Faraday’s law of electromagnetic induction to measure volume flow of conductive liquid.
Split structure lets you install the display converter far away from hot, vibrating or narrow pipeline positions.
It fits all conductive fluid like clean water, sewage, acid-alkali liquid and sand slurry.
Wastewater & sewage treatment plant: domestic sewage, industrial waste water.
Chemical industry: acid, alkali, salt corrosive conductive liquid.
Mining & metallurgy: mineral slurry, mud, industrial circulating water.
Water supply & drainage: city tap water, river water, underground water monitoring.
Food & beverage: juice, wine, beverage, food sanitation liquid.
Paper & pulp: pulp slurry, paper making wastewater.
Power plant: cooling circulating water, desulfurization fluid.
Split remote design: Converter wall-mounted separately, solve high temperature & vibration interference on site.
High measuring precision: Optional 0.5% or 1.0% accuracy grade.
No inner moving parts, low wear, long service life and minimal maintenance.
Full anti-corrosion options: Rubber, PTFE, PU lining; 316L, Hastelloy, tantalum electrodes for different fluids.
Multiple standard signal outputs: 4-20mA current, pulse frequency, RS485 Modbus RTU communication.
Clear LCD digital display, support flow rate, total flow, forward/reverse flow data view.
IP67 protection grade for sensor and converter, stable performance in humid industrial environment.
Wide measuring velocity range: 0.1 ~ 15 m/s, adapt low and high flow working conditions.
Standard flange connection, easy pipeline installation, match mainstream industrial pipe standards.
Support OEM & ODM custom: cable length, lining material, electrode, power supply, output function.
Working Principle
The split electromagnetic flowmeter consists of measuring sensor and separate converter. When conductive liquid flows through the magnetic field inside the sensor pipeline, the liquid cuts magnetic induction lines to generate induced voltage signal. Two electrodes inside the pipe capture the tiny voltage signal, which transmits to wall-mounted converter via shielded cable. The converter amplifies, calculates and converts the signal into readable flow data and standard industrial output signals.
Item | Standard Specification |
Product Model | JC-090 Split Type Electromagnetic Flowmeter |
Measuring Principle | Faraday’s Law of Electromagnetic Induction |
Nominal Diameter | DN50 / DN65 / DN80 / DN100 / DN125 / DN150 / DN200 (custom DN10~DN1200 available) |
Accuracy Class | 0.5% FS / 1.0% FS (optional) |
Velocity Range | 0.1 ~ 15 m/s, recommended 1 ~ 5 m/s |
Medium Conductivity | ≥5 μS/cm (conductive liquid only) |
Liner Material | Hard Rubber, Soft Rubber, PTFE, Polyurethane PU |
Electrode Material | 316L Stainless Steel, Hastelloy C, Tantalum, Platinum Iridium |
Nominal Pressure | Standard 1.6 MPa; custom 0.6 / 2.5 / 4.0 MPa |
Medium Temperature | Rubber liner: -20 ~ +80℃; PTFE liner: -20 ~ +180℃ |
Connection Type | Standard Flange (ANSI / DIN / GB flange customizable) |
Signal Cable Length | Standard 10m; custom 5~100m shielded cable |
Power Supply | DC24V / AC220V dual option |
Signal Output | 4~20mA (0~750Ω load), Pulse / Frequency, RS485 Modbus RTU |
Protection Grade | Sensor IP67, Converter IP67 |
Ambient Temp | -20℃ ~ +55℃ |
Display | LCD digital screen, instantaneous flow, totalizer, forward/reverse flow |
Installation Requirement | Front straight pipe ≥5DN, rear straight pipe ≥3DN |
Parameters can be customized as required.
