26Ghz Radar Level Transmitter
Working Principle
The radar level antenna emits narrow microwave pulses, which are transmitted downwards through the antenna. These pulses come into contact with the surface of the measured medium and are reflected back. The reflected signals are then received by the antenna system, which transmits them to the electronic circuitry. The electronic circuitry automatically converts these signals into level measurements.
Product Advantages
l Non-contact radar technology: No wear, no contamination.
l Small antenna size: Facilitates easy installation.
l Shorter wavelength: Provides better reflection on inclined solid surfaces.
l Smaller measurement blind zone: Achieves excellent results even in small tank measurements.
l High frequency: Ideal for measuring solids and low dielectric constant media.
Technical Parameters
l Product Name: 26G Radar Level Transmitter
l Product Series: JC-51L
l Measurement Range: 10m, 20m, 30m, 50m, 70m
l Antenna Type: Rod, Drop, Flat, Horn, Parabolic, Lens
l Measurement Accuracy: 0.05% ~ 0.1% of Full Scale
l Power Supply: 24VDC (Two-wire, Four-wire)
l Signal Output: 4-20mA, HART, RS485, Modbus
l Process Temperature: -40 ~ +200°C
l Process Pressure: -0.1 ~ 10MPa
l Process Connection: Thread, Bracket, Flange
l Protection Level: IP67
l Explosion-proof Grade: Exd II CT6 Gb
