Product Overview
The JC-52L Cable Type Guided Wave Radar Level Transmitter is a TDR-based level measurement instrument designed for continuous level measurement of liquids and solids.
The transmitter sends high-frequency electromagnetic pulses along a flexible cable probe. When the signal reaches the surface of the measured medium, part of the pulse is reflected back. The instrument calculates the level based on the time difference between transmission and reflection.
With a cable probe design and measuring range up to 30m, this guided wave radar transmitter is suitable for large storage tanks, chemical vessels, oil tanks, and industrial process applications where long measuring distances are required.
Applications
Chemical Storage Tanks
Suitable for continuous liquid level monitoring in chemical process tanks.
Oil and Fuel Storage Tanks
Used for inventory monitoring and process control.
Large Water Treatment Tanks
Provides reliable level measurement for large-volume water storage.
Industrial Process Vessels
Suitable for vessels requiring long insertion length and flexible installation.
Key Features and Benefits
1. Long Measuring Range up to 30m
The cable probe design allows installation in tall tanks and large storage vessels.
2. Reliable TDR Measurement Technology
The guided wave radar principle provides stable measurement under challenging process conditions.
3. Flexible Cable Probe Configuration
Cable length and probe materials can be selected according to tank dimensions and medium requirements.
Applicable for liquid level and selected solid level measurement applications.
5. Multiple Communication Options
Supports 4-20mA, HART, RS485, and Modbus communication options.
6. High Temperature and Pressure Customization
Special configurations are available for demanding process conditions.
Technical Specifications
Parameter | Specification |
|---|
Product Model | JC-52L |
Product Type | Cable Type Guided Wave Radar Level Transmitter |
Measuring Principle | TDR (Time Domain Reflectometry) |
Antenna Type | Cable Probe |
Measuring Range | 0~30m |
Measurement Accuracy | 0.05%~0.1% F.S. |
Antenna Material | PTFE / 304 SS / 316 SS Optional |
Medium | Liquid / Solid Level Measurement |
Power Supply | 24VDC (2-wire / 4-wire), 220VAC Optional |
Output Signal | 4-20mA / HART / RS485 / Modbus Optional |
Process Temperature | -40~250℃ Customizable |
Process Pressure | -0.1~2MPa Customizable |
Process Connection | Thread / Bracket / Flange / Clamp Optional |
Electrical Connection | M20×1.5 / 1/2 NPT Optional |
Protection Rating | IP67 |
Explosion-proof | Ex d IIC T6 Gb Optional |
Installation | Top Mounted |
Configuration Options
Available options include:
Cable length
Probe material
Output communication
Process connection
Power supply
Explosion-proof version
Selection Guide
For correct model selection, please provide:
Liquid / solid type
Dielectric constant
Corrosiveness
Tank height
Measuring range
Installation position
Process Conditions
Electrical Requirements
Output signal
Communication protocol
FAQ
Q1: What is the difference between cable and rod guided wave radar?
Cable type is mainly used for longer measuring distances and large tanks, while rod type is more suitable for shorter ranges and compact vessels.
No. Guided wave radar is a contact measurement technology because electromagnetic pulses travel along the probe.
Yes. Suitable probe materials such as PTFE, 304, or 316 stainless steel can be selected according to media compatibility.
Please provide measuring range, medium, temperature, pressure, connection type, and output requirement.
